| |
 | EOS4 |
| Type 4 integrated compact light curtain |
 |
| JANUS |
| Type 4 Muting light curtain |
|
| JANUS LR |
| Heavy Duty Long Range Type 4 light curtain |
|
| JANUS M TRX |
| Type 4 light grid with Muting and retro-reflector |
|
| EOS2 |
| Type 2 integrated compact light curtain |
|
| PHARO |
| Type 3 laser scanner |
|
| VISION MXL |
| Type 2 light curtain with integrated Muting |
|
| METRON |
| measurement and control light curtain |
|
| ADSR1 |
| Light curtain module Type4/PLe |
|
| ADSRT |
| Two-hand control module Cat.4/PLe |
|
| ADSRM |
| Light curtain module Type4/PLe with muting function |
|
| AUSX |
| Control unit for Type2/PLd safety photocells |
|
| AUSXM |
| Muting control unit for Type2/PLd safety photocells |
|
 | AU S-TWIN |
| Type 2 control unit |
|
| A-CI5 |
| AS-i Safety at Work interface |
|
|
| |
AU S-TWIN
|
TYPE 2 SAFETY CONTROL UNIT
New control unit which, used in conjunction with the safety barriers of the series Argolux AS, Minerva or Ulisse, forms a type 2 photoelectric safety system for the protection of workers exposed to risks arising from the use of hazardous machines. It's designed in compliance with the European Standard EN 61496-1 and the International Standard IEC 61496-1.
Conforming to:
- 98/37/EEC "Directive on Machines"
- 89/336/EEC "Electromagnetic Compatibility Directive"
- 73/23/EEC "Low Voltage Directive"
- EN 61496-1-2 and IEC 61496-1-2 "Electrosensitive protection devices"
|
| Model | AU S-TWIN | Ordering
Code | 1201708 |
[Technical Detail Table]
Technical Specifications:
It can control and be connected to:
- 1 or 2 barriers of the series Argolux AS
- 1,2,3 or 4 photocells of the series Minerva or Ulisse
- 1 barrier of the series Argolux AS and either 1 or 2 photocells of the series Minerva or Ulisse
- Power supply 24 Vcc ±20%
- Selectable (dip-switch) manual or automatic reset
- Perfect mechanical and electrical interchangeability with the control unit AU S3 (same housing and same connection diagram)
- Feedback input for the control of the final switching devices (FSD)
- Correct alignment and fault diagnosis indicator Led's
- 2 NO and 1 NC outputs with safety relays using forced guide relays
- Provision for fastening to a bar according to Standard EN 50022-35
- Terminal blocks connection
DISCLAIMER
The products described in this catalogue can be modified by Reer SpA without prior notice.
All the information and examples concerning applications are given as a pure indication. Reer does not assume any responsibility in that sense.
Concerning your application, refer only to its detailed risk analysis; concerning the use of Reer products, refer only to their user manual and contact Reer directly in any case of doubt.
| |
|
 |
