| |
 | EOS4 |
| Type 4 integrated compact light curtain |
 |
| JANUS |
| Type 4 Muting light curtain |
|
| JANUS LR |
| Heavy Duty Long Range Type 4 light curtain |
|
| JANUS M TRX |
| Type 4 light grid with Muting and retro-reflector |
|
| EOS2 |
| Type 2 integrated compact light curtain |
|
| PHARO |
| Type 3 laser scanner |
|
| VISION MXL |
| Type 2 light curtain with integrated Muting |
|
| METRON |
| measurement and control light curtain |
|
| ADSR1 |
| Light curtain module Type4/PLe |
|
| ADSRT |
| Two-hand control module Cat.4/PLe |
|
| ADSRM |
| Light curtain module Type4/PLe with muting function |
|
 | AUSX |
| Control unit for Type2/PLd safety photocells |
|
| AUSXM |
| Muting control unit for Type2/PLd safety photocells |
|
| A-CI5 |
| AS-i Safety at Work interface |
|
|
| |
AUSX
|
TYPE 2 CONTROL UNIT / PLd
Type 2 control unit to which it is possible to connect from 1 to 4 safety photocells of the Ilion or Ulisse series, thus forming a Type 2 ESPE having a two-channel relay output and the start/restart interlock and FSD monitoring safety functions.
Conforming to:
- 2006/42/CE Machinery Directive
- 2004/108/CE Electromagnetic Compatibility Directive (EMC)
- 2006/95/CE Low Voltage Directive (LVD)
- IEC/EN 61496-1 Ed. 2.1 Safety of machinery - Electro-sensitive protective equipment- General requirements and tests
- IEC/TS 61496-2 Ed. 2 Safety of machinery- Electro-sensitive protective equipment – Part 2:Particular requirements for equipment using Active Optoelectronic Protective Devices
- EN ISO 13849-1 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design.
- IEC/EN 62061 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
- IEC 61508 Functional safety of electrical/electronic/ programmable electronic safety-related systems.
- UL (C+US) for USA and Canada
- ANSI / UL 1998 Software in Programmable Components.
|
| Model | AUSX | Ordering
Code | 1201710 |
[Technical Detail Table]
Technical Specifications:
- Up to 4 safety photocells can be connected
- Periodic self test
- Power supply 24 Vcc ± 20%
- Selectable manual or automatic restart
- Monitored restart contact
- 2 NO outputs with safety relays using forced guide contacts
- 1 pnp ´output status´ signalisation output
- Beams status and fault diagnosis indicator Leds
- Feedback input for the control of the machine´s final switching devices (FSD)
- Box width 22,5 mm
- Provision for fastening to a bar according to Standard EN 50022-35
- Connections with terminal blocks
DISCLAIMER
The products described in this catalogue can be modified by Reer SpA without prior notice.
All the information and examples concerning applications are given as a pure indication. Reer does not assume any responsibility in that sense.
Concerning your application, refer only to its detailed risk analysis; concerning the use of Reer products, refer only to their user manual and contact Reer directly in any case of doubt.
| |
|
 |
