| |
 | EOS4 |
| Type 4 integrated compact light curtain |
 |
| JANUS |
| Type 4 Muting light curtain |
|
| JANUS LR |
| Heavy Duty Long Range Type 4 light curtain |
|
| JANUS M TRX |
| Type 4 light grid with Muting and retro-reflector |
|
| EOS2 |
| Type 2 integrated compact light curtain |
|
| PHARO |
| Type 3 laser scanner |
|
 | VISION MXL |
| Type 2 light curtain with integrated Muting |
|
| METRON |
| measurement and control light curtain |
|
| ADSR1 |
| Light curtain module Type4/PLe |
|
| ADSRT |
| Two-hand control module Cat.4/PLe |
|
| ADSRM |
| Light curtain module Type4/PLe with muting function |
|
| AUSX |
| Control unit for Type2/PLd safety photocells |
|
| AUSXM |
| Muting control unit for Type2/PLd safety photocells |
|
| A-CI5 |
| AS-i Safety at Work interface |
|
|
| |
VISION MXL
|
SAFETY LIGHT CURTAIN TYPE 2 WITH INTEGRATED MUTING FUNCTION
Type 2 safety light curtain with integrated MUTING function and integrated control functions.
2-sensor Muting logic, with two-way or one-way operating logic.
Muting timeout. Muting enable. Override with two operating modes, selectable.
Integrated Start/Restart Interlock function. Integrated EDM (control of external contactors).
All configurations via hardware through 12-pole M16 main connector.
The excellent performance / price ratio makes Vision MXL the ideal choice for the protection of Type 2 applications with Muting.
Now also available the MXL L and MXL T versions with pre-wired and pre-aligned Muting sensors.
Conforming to:
- 2006/42/CE Machinery Directive
- 2004/108/CE Electromagnetic Compatibility Directive (EMC)
- 2006/95/CE Low Voltage Directive (LVD)
- IEC/EN 61496-1 Ed. 2.1 Safety of machinery - Electro-sensitive protective equipment- General requirements and tests
- IEC/TS 61496-2 Ed. 2 Safety of machinery- Electro-sensitive protective equipment – Part 2:Particular requirements for equipment using Active Optoelectronic Protective Devices
- EN ISO 13849-1 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design.
- IEC/EN 62061 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
- IEC 61508 Functional safety of electrical/electronic/ programmable electronic safety-related systems.
- UL (C+US) for USA and Canada
- ANSI / UL 1998 Software in Programmable Components.
|
Available Model:
- resolution 30 mm for hand detection
- resolution 40 mm for hand detection
- 2, 3 and 4 beams for access control
The MXL series is recommended for Muting applications: - Where personnel is supposed to access the area under control during the non-dangerous part of the machine cycle (e. g. manual load/unload of product). - For two-way transit of material through the gate to be controlled by the light curtain (e.g. palletizers).
- The MXL U series is recommended for Muting applications: For one-way transit (exit only) of material through the gate to be controlled by the light curtain (e.g.palletizers).
- The MXL L series manages the Muting function in one-way mode and is particularly suitable for protecting the outfeed gates of palletising systems.
- The MXL T series manages the Muting function in two-way mode for the protection of the infeed/outfeed gates in palletising systems.
[Ordering Code List]
[Technical Detail Table]
Technical Specifications:
- Integrated 2-sensor Muting function
- Safety level: Type 2
- Integrated Start / Restart interlock function
- External Device Monitoring feedback input
- Additional Muting Enable safety input
- Maximum scanning range: 8 m
- Power supply 24 Vcc ± 20%
- Operating temperature: 0-55 °C
- Degree of protection: IP 65
- 2 Safety solid state pnp outputs - 500 mA @ 24 VDC - protected against short circuits and overloads
- Connection with M12, 5 poles connector (Emitter) and M16, 12 poles conector (Receiver)
- Correct alignment and beam status indicator Leds
- 3 fastening modes: back slot, side slot or to the top and lower end
- Connection cable max. lenght between light curtains and interface: 100m
- Accesory deflector mirrors for the realization of perimeter protections along up to 4 sides
Ideal for the protection of:
- Palletisers and depalletisers
- Handling and storage systems
- Assembly and disassembly lines
- Robotised areas
- Wood and marble processing machines
- Welding systems and robots
=> Note: where the risk analysis allows the use of category 2 safety equipment
DISCLAIMER
The products described in this catalogue can be modified by Reer SpA without prior notice.
All the information and examples concerning applications are given as a pure indication. Reer does not assume any responsibility in that sense.
Concerning your application, refer only to its detailed risk analysis; concerning the use of Reer products, refer only to their user manual and contact Reer directly in any case of doubt.
| |
|
 |
