| |
 | EOS4 |
| Type 4 integrated compact light curtain |
 |
| JANUS |
| Type 4 Muting light curtain |
|
| JANUS LR |
| Heavy Duty Long Range Type 4 light curtain |
|
| JANUS M TRX |
| Type 4 light grid with Muting and retro-reflector |
|
| EOS2 |
| Type 2 integrated compact light curtain |
|
| PHARO |
| Type 3 laser scanner |
|
| VISION MXL |
| Type 2 light curtain with integrated Muting |
|
 | METRON |
| measurement and control light curtain |
|
| ADSR1 |
| Light curtain module Type4/PLe |
|
| ADSRT |
| Two-hand control module Cat.4/PLe |
|
| ADSRM |
| Light curtain module Type4/PLe with muting function |
|
| AUSX |
| Control unit for Type2/PLd safety photocells |
|
| AUSXM |
| Muting control unit for Type2/PLd safety photocells |
|
| A-CI5 |
| AS-i Safety at Work interface |
|
|
| |
METRON
|
AUTOMATION, CONTROL AND MEASUREMENT LIGHT CURTAIN
Light curtains conceived for those industrial and automation applications in which object detection, measurement and recognition are necessary.
Depending on the number and position of the intercepted beams, Metron is able to provide the relevant information to a PC or PLC in real time. That is:
- Dimensional measurement
- Profile or shape detection
- Position detection
- Piece counting
- Discrimination of object presence or absence
All the operating functions are integrated into the receiver, therefore Metron needs no external control unit.
Metron can be equipped with an RS-485 serial output and/or with 0/24V pnp solid state outputs, through which the relevant data can be transmitted to the PC/PLC.
The Metron outputs operation and operating modes can be programmed via the Metronconf special software, supplied with each light curtain. It can be installed on any PC and it is provided with a user-friendly graphic interface.
In order to fulfil any application requirement, Metron is available in various models, having different beam spacing (resolution), that is 5, 10, 25, 30, 50 and 75 mm, and whose controlled heights vary from 140 mm to 2525 mm.
Possibility of connecting up to 8 light curtains, even having different heights and beam spacing, on just one serial line (complex systems for multi-dimensional measurement).
Complete diagnostics system.
Special customised models available upon request.
Conforming to:
CE:
- 89/336/EEC Electromagnetic Compatibility Directive
- 23/73/EEC Low Voltage Directive
|
Available Model: 5
- beam spacing (resolution) equal to 5 mm; range: 2 m
- beam spacing (resolution) equal to 10 mm; range: 16 m
- beam spacing (resolution) equal to 25 mm; range: 6 m
- beam spacing (resolution) equal to 30 mm; range:16 m
- beam spacing (resolution) equal to 50 mm; range: 6 m
- beam spacing (resolution) equal to 75 mm; range: 6 m
[Ordering Code List]
[Technical Detail Table]
Technical Specifications:
- Emitter assembly electrical connections: one M12, 8 poles connector
- Receiver assembly electrical connections: one M16, 12 poles main connector + one M8, 3 poles configuration connector for RS-232
- One programmable digital output
- Four programmable 0/24 V solid state outputs (“A” models)
- Two programmable 0/24 V solid state outputs, plus one RS 485 serial output (“B” models)
- Synchronisation between emitter and receiver via cable or via optical link, selectable
- 7 segment display and signalling LEDs for light curtain status, alignment and self diagnosis information
- “Metroconf” configuration software for solid state outputs functional setting and RS 485 serial output programming (transmission mode, baud rate, parity, start/stop characters, binary format, hex, ascii, etc.)
- Possibility of visualising each beam’s status on a PC screen.
- Maximum connection length between light curtain and interface: 50 m
- Mounting: on back or slide slot, or on top (with rotating brackets SFB)
- Cross section dimensions: 35 mm X 45 mm
DISCLAIMER
The products described in this catalogue can be modified by Reer SpA without prior notice.
All the information and examples concerning applications are given as a pure indication. Reer does not assume any responsibility in that sense.
Concerning your application, refer only to its detailed risk analysis; concerning the use of Reer products, refer only to their user manual and contact Reer directly in any case of doubt.
| |
|
 |
